Air source heat pumps

The air source heat pump is a compact unit providing energy for air conditioning and domestic hot water

» The air source heat pumps ...

... are an ecological and cost-effective alternative to heating with traditional energy sources – coils, woods, petrol, gas. They are modern, relatively simple for installations machines, easy to use and safe to operate. They are provided for heating and cooling buildings, flats and detached houses. They can heat water for household use in “heating” regime.

To install the air source heat pump, it’s not necessary to have a drilling or to dig for placing a supplying collector; also it’s not necessary to equip an appropriate place for the local room indoor.

During the heating season such pump can provide 90% of the needed heat. Although the winters are becoming milder, though during the current sharp falls in temperature you’ll have to use an excess source of heat.

The models with heating power up to 30 kW are with built-in circulator pump and expanding vessel. They are equipped with and European microprocessor control, production of CAREL Control systems. As an option is offered a wired remote control. The compressors are rotor: Sanyo - in model HRCF025, and Daikin scrool in the other models.

The HRCF type air source heat pumps are made of stainless plate-type heat exchanger for the internal heating installation and 6-pole axial fans with external rotor with lowered noise level.

» The air source heat pumps with heat recovery ...

... are provided for heating and cooling buildings, flats and detached houses. They can heat water for household use both in “heating” and “cooling” regime. For comparison - widespread market chillers have the opportunity for heating water only in “heating” regime as for this purpose they use part of the energy required for heating the premises.

Heating water from that type heat pumps is achieved by cooling the overheated refrigerant on the output of the compressor in a separate small heat exchanger, which doesn’t increase the machine’s cost of electricity. Thus, for providing hot water are used 20 – 30% if the energy consumed by the compressor, which otherwise is given as heat in the atmosphere.

Because of its unique defrost system with embedded in the evaporator electrical heaters, these heat pumps work efficiently both in fog, combined with low temperatures, and in temperatures well below -12 ° C, which is difficult to achieve with the mass models chillers and air conditioners.

The HRCH/RH type air source hat pumps are made with copper shell-and-tube heat exchanger for the internal heating installation, stainless heat exchanger for hot water, built-in circulator pump and 6-pole axial fans with external rotor with lowered noise level.

CHARACTERISTICS

» Heat Pumps HRCF:

» Heat Pumps HRCF/RH: